Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Cap & Crown for Cherry Hill Homeowners
A Chimney Cap & Crown in Cherry Hill typically costs between $180 and $950 depending on whether you need a simple cap replacement or full crown rebuild, and most jobs are completed in a single visit. At Hearthstone Chimney Co., we’ve been installing and repairing chimney caps and crowns across Cherry Hill since 1984, and we back every job with our 90-Day Done Right Promise in writing.
Cherry Hill’s freeze-thaw cycles hit chimney crowns harder than almost any other part of your system. Water seeps into hairline cracks, expands when temperatures drop below 32 degrees, and turns a minor flaw into a major leak. We’ve replaced crowns in Barclay Farm that looked fine from the ground but were crumbling at the flue line, and we’ve fitted multi-flue caps on homes near the Cherry Hill Mall where squirrels had made a habit of nesting. Russell Haines started this company on the principle that a homeowner deserves to see the problem before paying to fix it. That hasn’t changed in 42 years. When you call (856) 543-2929, a live person answers, 24 hours a day, and we’ll schedule a Level-2 camera inspection so you know exactly what your chimney needs.
What Our Chimney Cap & Crown Service Includes
Cap Installation
A chimney cap is the metal or mesh cover that sits atop your flue, keeping rain, animals, and debris out while letting smoke escape. In Cherry Hill, we install caps on chimneys that have never had one, often in neighborhoods like Ashland and Erlton where original construction skipped this basic protection. Our technicians measure your flue on site, then fit a cap from Gelco or Olympia Chimney that matches your chimney’s dimensions exactly. We secure it with stainless steel fasteners that won’t rust out in five years, and we show you the finished work before we leave.
Cap Replacement
Caps rust, blow off in storms, or get damaged by falling branches. If your cap is missing, rattling, or visibly corroded, water is already getting into your flue. We remove the old cap, inspect the flue tile for damage that the missing cap may have caused, and install a replacement that fits properly. In Springdale, we’ve replaced caps that were the wrong size from day one, installed by roofers who treated it as an afterthought. We don’t do afterthoughts. The new cap gets sealed at the base, and we document the installation with photos for your record.
Crown Repair
The crown is the concrete slab that covers the top of your chimney, sloped to shed water away from the flue. When it cracks, water runs straight into the masonry below, causing spalling bricks and deteriorating mortar joints. We repair crowns that have minor cracking using professional-grade crown coating materials, after cleaning and profiling the surface so the repair bonds properly. For crowns with more extensive damage, we may recommend a full rebuild. Either way, you’ll see the photos and hear our plain-English verdict before any work begins.
Crown Coating
Crown coating is a specialized cementitious or elastomeric application that seals existing cracks and restores the crown’s water-shedding slope. It’s not a substitute for a crown that’s structurally failed, but for crowns with surface cracking or minor deterioration, it adds years of life at a fraction of rebuild cost. We apply crown coating only after pressure-washing the surface and letting it dry completely, because coating over damp concrete traps moisture and accelerates decay. The product we use is formulated for chimney crowns specifically, not generic masonry sealer, and it remains flexible enough to handle Cherry Hill’s temperature swings.
Multi-Flue Cap
Homes with multiple fireplaces or a fireplace and furnace sharing one chimney need a multi-flue cap that covers all flues with a single structure. These caps are larger, heavier, and require precise measurement to ensure proper clearance and draft. We’ve installed multi-flue caps in Kings Grant and throughout Cherry Hill’s older neighborhoods where the original cap was never designed for modern heating equipment. The cap gets mounted to the chimney crown or masonry with proper flashing, and we verify that each flue maintains adequate draft after installation.
Custom Cap
Some chimneys need what stock catalogs don’t offer: an oversized flue, an unusual shape, or a homeowner who wants copper that weathers to a green patina matching their roof details. We fabricate and install custom caps using measurements taken on site, working with Copperfield and Famco for materials that perform as well as they look. A custom cap costs more and takes longer to produce, but for certain homes in Cherry Hill’s historic districts or with architecturally significant details, it’s the only approach that makes sense. We quote custom work upfront, with no deposit required until you approve the design.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Cap & Crown
We’ve worked with Gelco caps since they were the standard in mid-Atlantic chimney supply, and we know their stainless steel and galvanized lines well enough to spot counterfeit products that show up through discount channels. When a Cherry Hill homeowner calls with a Gelco cap that’s rusting prematurely, we check whether it’s genuine Gelco stainless or a lesser grade that was substituted. Olympia Chimney caps are our go-to for multi-flue installations and custom sizes, their engineering specs are conservative, which means the cap outlasts the warranty. We’ve installed hundreds of Olympia caps in Camden and Gloucester counties, and we keep common sizes in stock to avoid delay.
Famco specializes in ventilation and chimney termination products with exacting specifications for draft-sensitive systems, we use their caps when a fireplace has known draft issues or when the flue configuration is non-standard. Copperfield provides the copper and custom-fabrication materials for our higher-end installations, their sheet stock welds cleanly and weathers predictably. Whether you have Gelco, Olympia Chimney, Famco, Copperfield, or any other make on your chimney, we can inspect it, repair it, or replace it with the correct component. We don’t substitute brands without telling you, and we don’t install anything we wouldn’t put on our own homes.
Signs You Need Chimney Cap & Crown Right Now
- Water stains on your ceiling near the fireplace. This means moisture is already inside the chimney structure, traveling down the flue or through cracked crown masonry until it finds your drywall. In Cherry Hill’s older homes, we’ve seen this mistaken for roof leaks and patched repeatedly by roofers who never looked at the chimney crown.
- Visible cracks or crumbling on the crown surface. Concrete crowns deteriorate from the top down, freeze-thaw cycling opens cracks wider each winter. What looks like a surface blemish in September becomes a channel for water by January. We document crown condition with camera inspection so you can see the depth of cracking for yourself.
- Rust streaks down the chimney face or on the damper. Rust means water is getting in, and it’s reacting with metal components. A proper cap prevents this. If your damper is rusted shut or your firebox has rust stains, the cap is either missing, damaged, or incorrectly installed.
- Animal sounds or debris in the flue. Squirrels, raccoons, and birds enter uncapped chimneys readily. Cherry Hill’s mature tree canopy makes this worse, animals travel from oak branches to chimney top without touching ground. A cap with proper mesh spacing keeps them out without restricting draft.
- The cap is missing, tilted, or visibly damaged from the ground. This seems obvious, but homeowners often don’t look at their chimney top until a problem appears inside. If you can see damage from your driveway, the cap has likely been compromised long enough to cause secondary issues. We check the flue and crown condition whenever we replace a damaged cap.
Our Chimney Cap & Crown Process - Step by Step
- 1
Schedule and confirm. Call (856) 543-2929 and a live person answers, any hour of any day. We book your appointment at a time that works, send a confirmation, and call ahead when the technician is en route. We’ll be there when we say.
- 2
Level-2 camera inspection. Our technician arrives in uniform, background-checked, and equipped with a chimney camera. We inspect the cap, crown, flue interior, and accessible masonry, recording video and still photos. You see what we see. No hidden damage, no surprises.
- 3
Plain-English verdict and upfront pricing. We explain what we found, show you the photos, and recommend specific repairs with exact pricing. The number on the estimate is the number on the invoice. If the crown is sound and only needs coating, we say so. If it’s failed and needs rebuild, we show you why. You decide what to do.
- 4
Professional installation or repair. Most cap and crown jobs finish in one visit. We use professional-grade materials from brands we trust, installed to manufacturer specifications and local code. For custom caps, we take precise measurements and schedule return installation when fabrication is complete.
- 5
Documentation and guarantee. You receive photos of the completed work, a written invoice detailing what was done, and our 90-Day Done Right Promise. If anything isn’t right, we come back and make it right. In writing, no arguing. That’s the Keystone Standard.
How Much Does Chimney Cap & Crown Cost in Cherry Hill?
Our Chimney Cap & Crown cost guide shows that a standard chimney cap replacement in Cherry Hill typically runs $180 to $450, depending on flue size, cap material, and whether the flue tile needs repair before the new cap goes on. Crown coating for a chimney with minor surface cracking usually falls between $350 and $650, while a full crown rebuild ranges from $650 to $950 or more for larger chimneys with multiple flues. Custom copper caps start around $800 and increase based on size and fabrication complexity.
Several factors move the price. Accessibility matters: a steep roof or chimney located away from ladder placement adds time and requires additional safety equipment. The extent of hidden damage affects cost too, a cap that blew off two winters ago may have allowed water to degrade the flue tile beneath it, and we won’t install a new cap over damaged tile. Material choice changes the number: galvanized steel costs less upfront but rusts faster in Cherry Hill’s humid summers and salted winter air, stainless steel or copper lasts decades longer. We quote each factor separately so you can choose what fits your budget and timeline.
To avoid overpaying, get a camera inspection that shows you the actual condition. Some contractors quote cap replacement when the real problem is crown failure, or vice versa. Our Level-2 inspection is included with every estimate, and the photos let you verify our recommendation. We also offer a Free Second Opinion on any written estimate you’ve received, bring us their quote and we’ll tell you straight whether it’s accurate, high, or missing something important.
Every estimate we provide includes the cap or crown work, materials, installation, cleanup, and our 90-Day Done Right Promise. No hidden fees, no trip charges, no surprise add-ons after we start. Call (856) 543-2929 for your free estimate, estimates are free and carry no obligation.
Chimney Cap & Crown Near Cherry Hill - Our Service Area
We serve homeowners throughout Camden County and into Gloucester County, including Chimney Cap & Crown in Camden, Chimney Cap & Crown in Gloucester, and communities like Evesham, Waterford, Winslow, Pennsauken, Deptford, Voorhees, West Deptford, Maple Shade, and Lindenwold. Most Cherry Hill appointments are scheduled within a few days, and we group our routing to minimize wait times in adjacent towns. Whether you’re in a 1960s ranch off Route 70 or a custom home near Croft Farm, we know the local housing stock and the chimney problems that come with it.
Serving Cherry Hill, NJ - Our Local Coverage Area
We’re based in the Cherry Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Cap & Crown in Cherry Hill
The cap is the metal cover that sits over your flue opening to block rain, animals, and debris. The crown is the concrete slab that tops your chimney masonry, sloped to shed water away from the flue. You need both because the cap protects the flue interior while the crown protects the chimney structure itself, without either, water enters and causes expensive damage to bricks, mortar, and sometimes your home’s interior. During our inspection, we evaluate both components and show you exactly what condition they’re in.
Most cap replacements and crown coatings are completed in two to four hours. A full crown rebuild typically takes a full day, and custom cap fabrication adds one to two weeks for production before installation. Our technicians arrive with the tools and common materials to finish standard jobs in a single visit, so you’re not waiting around for a return trip. We’ll give you a specific time estimate when we quote the work.
Standard cap replacement runs $180 to $450, crown coating $350 to $650, and full crown rebuild $650 to $950 or more depending on chimney size. Custom caps and complex access situations cost more. We provide exact pricing after inspection, and our estimates are free with no obligation. Call (856) 543-2929 for your specific quote.
Yes. We install, repair, and replace Gelco and Olympia Chimney caps regularly, and we stock common sizes for faster turnaround. If you have a Famco or Copperfield cap, or another brand entirely, we service those too. Our technicians carry the tools and fasteners specific to each manufacturer’s mounting system.
We answer calls 24 hours a day, 7 days a week, and we prioritize storm damage that leaves your chimney open to water intrusion. While we don’t promise immediate dispatch for non-emergency work, a missing or damaged cap after high winds gets scheduled as quickly as routing allows, often within 24 to 48 hours. We’ll also advise you on temporary measures to keep water out until we arrive.
Every job is backed by our 90-Day Done Right Promise: if it’s not right, we come back and make it right, in writing, no arguing. Manufacturer warranties on caps vary by material, stainless steel typically carries longer coverage than galvanized. We register your warranty and provide documentation so you’re covered on both fronts.
Clear a path to your fireplace if we’re doing interior inspection, and ensure we have access to your roof area from outside. Move vehicles if our ladder truck needs the driveway. Otherwise, no special preparation is needed. We’ll bring drop cloths, shoe covers, and everything required to protect your home while we work. Call (856) 543-2929 when you’re ready to schedule.
Schedule Your Chimney Cap & Crown Service in Cherry Hill Today
Call (856) 543-2929 now and a live person will answer, 24 hours a day, to schedule your free estimate. We’ll inspect your chimney with our Level-2 camera, show you exactly what we find, and quote honest upfront pricing with no surprises on the bill. Hearthstone Chimney Co. has served Cherry Hill and surrounding communities for over 42 years, and we plan to be here for decades more. Done right, and we stand behind it.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Cherry Hill since 1984.