Famco Chimney Cleaning & Sweep Nationwide

Famco Chimney Cleaning & Sweep in Cherry Hill: What to Know First

We provide independent Famco chimney cleaning and sweep service throughout Cherry Hill, with most Level 1 and Level 2 inspections completed in a single visit and upfront pricing agreed before we start. A standard Famco sweep and inspection runs $89-$275 depending on access and condition; we do not upsell liners or caps you do not need. This page is for Cherry Hill homeowners with Famco chimney caps, dampers, or venting who want the flue inspected, documented, and cleaned by technicians who know the hardware.

Call (856) 543-2929

Call (856) 543-2929 - a live person answers, 24 hours a day.

How Famco Products Fail - and How We Fix Them

• Famco chimney caps in the WC and CBO series warp at the lid hinge after five to seven Cherry Hill winters. The galvanized steel frame holds up, but the lid binds and no longer opens fully on draft. We remove the cap, check the flue for creosote buildup that the partial opening caused, and either reseat the original lid or replace with a stainless Famco cap that handles freeze-thaw without seizing.
• Famco top-sealing dampers (TSD series) lose their silicone gasket seal faster than masonry throat dampers in our freeze-thaw climate. Cherry Hill’s temperature swings from October through April harden the gasket; the damper then leaks conditioned air and lets creosote odors back into the house. During sweep visits we test the seal with a smoke pencil, document the gap with camera photos, and replace the gasket or recommend a stainless damper upgrade if the frame is still square.
• Famco B-vent and gas vent connectors collect condensation debris at the low elbow in ranch-style homes common in Cherry Hill’s Kingston and Ashland sections. The vent runs long and flat to reach the chimney chase, and moisture mixes with combustion particulate. We pull the connector, run a brush and vacuum through the full length, and check the Famco termination cap for bird nesting or lint blockage that accelerates the problem.
• Famco wind-directional chimney caps (WD series) seize on the bearing race after coastal moisture seasons. The cap is meant to spin with wind direction, but salt and humidity from our proximity to the Delaware freeze the race. We disassemble the cap during cleaning, regrease or replace the bearing, and verify free rotation before we leave - a stuck WD cap creates downdraft and smoke spillage that owners mistake for a flue problem.
• Famco firestop spacers in manufactured chimney chase installations compress or crack where they pass through attic spaces in Cherry Hill’s 1960s-1980s split-levels. The original fiberglass packing settles, leaving a gap that draws attic dust into the flue and stains the hearth. We remove the old packing, clean the surrounding flue section, and reinstall with fresh fire-rated material that maintains the chase seal.

Our Famco Chimney Cleaning & Sweep Process

1. 1
   Call and schedule. A live person answers at (856) 543-2929, confirms your Famco model if you know it, and books a window. We send a confirmation text with your technician’s name.
2. 2
   Arrival and walkthrough. Our uniformed technician arrives, lays drop cloths, and asks about any smoke spillage, odors, or draft issues you’ve noticed. We check the Famco cap or damper model from the roof or fireplace opening.
3. 3
   Level 1 or Level 2 inspection with camera. We run a chimney camera up the flue and photograph every surface. You see the images on our tablet as we go. If we find creosote glazing, cracked flue tile, or a failed Famco component, we explain it in plain English before any work proceeds.
4. 4
   Sweep and component service. We rotary-brush the flue, HEPA-vacuum the smoke chamber and hearth, and address the Famco hardware - reseat a cap, replace a gasket, clean a vent connector, or note what needs ordering.
5. 5
   Test and document. We run a draft test, verify all Famco moving parts operate, and email you a photo report with our findings. The 90-Day Done Right Promise covers everything we touched.
6. 6
   Cleanup and upfront billing. We pack out, review the invoice with you, and collect payment. The estimate number matches the invoice number. No surprises.

What Famco Chimney Cleaning & Sweep Costs in Cherry Hill

What moves the price: roof pitch and access, flue length, creosote density (stage 1 brushable vs. stage 3 glazed), and whether the Famco component needs replacement or just cleaning and adjustment. We agree on the full number before we start. Call (856) 543-2929 for a free estimate - we come to your Cherry Hill home, assess the chimney and Famco hardware, and give you a written quote with no obligation.

Why Cherry Hill Homeowners Call Hearthstone Chimney Co. for Famco Work

We are an independent Famco service provider - not affiliated with the manufacturer - which means we source parts based on what your chimney actually needs, not what a brand catalog pushes. Our technicians carry Famco caps, dampers, and gaskets on the truck, plus backup inventory from DuraFlex, HeatShield, and Gelco for situations where an aftermarket solution outlasts the original design.

The 90-Day Done Right Promise governs every job: in writing, no arguing. If the draft is off or a gasket we installed fails inside ninety days, we return and make it right. Russell Haines and our crew have worked Cherry Hill chimneys for years, including the older colonials in Barclay Farm where the fireplaces and their Famco venting run back to the 1970s. We know which houses have the long B-vent runs, which caps face the prevailing wind, and which attics hide compressed firestops. The chimney either draws the way it should, or it does not - and we will not leave until we know which.

FAQs