Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Fireplace Services in Cherry Hill: What to Know First
We provide independent Olympia Chimney fireplace services in Cherry Hill, from gas valve troubleshooting on the OlyVent Pro series to firebox refractory panel replacement on the OlyWood 2000 line. Most Olympia Chimney repairs run $180 to $650 and are completed in a single visit with the parts we stock on our trucks. We do not mark up scare tactics - if your damper just needs adjustment, we tell you that.
This page is for Olympia Chimney owners in Cherry Hill who want straight talk about what is actually wrong, what it will cost, and whether the repair is worth doing on an aging unit. If you own a home in Barclay Farm, Erlton, or anywhere along Chapel Avenue and your Olympia Chimney fireplace is drawing poorly, smoking into the room, or refusing to light, call us at (856) 543-2929. A live person answers, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- OlyVent Pro direct-vent gas fireplaces: failed thermopile or worn gas valve. We see this often in Cherry Hill colonials where the unit cycles on and off for twenty winters. The thermopile drops below 325 mV and the pilot will not hold. We test with a manometer, replace the OEM SIT valve or a compatible Robertshaw only if the manifold pressure tests out of spec, and we clock the meter to confirm input rate. No guesswork - we verify flame color and CO before we leave.
- OlyWood 2000 wood-burning fireplaces: cracked refractory panels and deteriorated firebrick. The factory panels are 1.25-inch refractory cement, and they thermal-shock after repeated over-firing. Cherry Hill’s freeze-thaw cycles do not help - moisture seeps through crown cracks, accelerates panel spalling, and you get hot spots that warp the steel firebox wrapper. We source Olympia-compatible panels or pour HeatShield refractory resurfacing when the damage is surface-level, not structural.
- OlyInsert pellet and wood inserts: auger jam or combustion blower failure. The OlyInsert 1200i uses a 1 RPM auger motor that strips its nylon bushing after heavy corn-blend use. We carry the replacement gearbox assembly, and we clean the entire burn pot and heat exchanger while we are in there. The combustion blower, meanwhile, pulls flue gas through a 3-inch flex liner - if the blower seizes, the unit back-puffs smoke into the room within thirty seconds. We test amp draw on both motors and replace only what failed.
- OlyVent Pro top-sealing dampers: cable fray or cap seal degradation. The stainless cable runs through a galvanized guide tube, and after a decade of Cherry Hill humidity, the cable kinks where it exits the firebox. The cap seal itself is a silicone gasket that hardens and lets rainwater run down the flue onto the gas logs. We replace the cable with a heavier-gauge stainless line and reseat the cap with a fresh gasket - or we retrofit a Gelco cap if the original casting is pitted.
- OlyWood 2000 throat dampers: rusted-out cast iron or missing pivot pins. Original equipment on units from the 1990s and early 2000s was a 24-inch cast iron plate that corrodes where creosote condenses above the smoke shelf. In Cherry Hill’s older homes, especially near the Cooper River where the air sits heavy, we see complete plate separation. We fabricate a stainless replacement or install a Lock-Top sealing damper if the throat is too damaged to seat properly. The chimney either draws the way it should, or it does not - and we will not leave until we know which.
Our Olympia Chimney Fireplace Services Process
- 1
Call and schedule. A live person answers, day or night. We ask the model name, age, and symptoms. For Olympia Chimney units, we check our parts board before we confirm the appointment so we do not waste your time.
- 2
Level-2 camera inspection and diagnosis. Our technician arrives in uniform, background-checked, with a digital chimney camera. We photograph the flue, firebox, and damper mechanism. You see the images on a tablet while we explain what we found in plain English.
- 3
Parts decision: OEM or quality aftermarket. We stock common Olympia Chimney wear parts - thermopiles, gas valves, refractory panels, auger motors. For discontinued lines, we source compatible parts from Famco or Copperfield that meet or exceed OEM spec. We tell you which we are using and why.
- 4
Repair with upfront pricing. The estimate you approve is the invoice you pay. No add-ons discovered mid-job. Most Olympia Chimney fireplace repairs are completed in one visit.
- 5
Combustion test and safety verification. Gas units get a full combustion analysis - CO, O2, draft pressure. Wood units get a smoke-pencil draft test and a visual flue inspection. We document results in writing.
- 6
Cleanup, guarantee, and next steps. We haul away old parts. Your work is covered by our 90-Day Done Right Promise in writing. If we swept the chimney, we note when the next cleaning is due based on your burn habits.
What Olympia Chimney Fireplace Services Costs in Cherry Hill
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Gas fireplace tune-up (OlyVent Pro) | $180 - $280 | Remote receiver replacement, thermopile swap, log repositioning |
| Refractory panel replacement (OlyWood 2000) | $340 - $580 | Number of panels, HeatShield pour vs. full replacement |
| Pellet insert auger/blower repair (OlyInsert) | $260 - $490 | Gearbox, motor, or both; liner condition if back-puffing |
| Damper repair or replacement | $220 - $420 | Throat damper fab vs. top-sealing retrofit |
| Fireplace conversion (wood to gas insert) | $2,800 - $4,500 | Liner sizing, gas line extension, permit |
These are Cherry Hill market ranges for Olympia Chimney equipment, based on parts we stock and labor at our standard rate. Your exact estimate comes after inspection - and estimates are free. Call (856) 543-2929 to schedule.
Why Cherry Hill Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We have been in Cherry Hill long enough to know which Olympia Chimney models were installed in the 1990s building boom and which are showing their age now. Russell Haines and our crew have worked fireplaces in Barclay Farm colonials, Kings Grant split-levels, and the ranch homes off Route 70 - we know the local draft patterns, the common venting shortcuts taken by builders here, and the permit requirements in Cherry Hill Township.
Our 90-Day Done Right Promise means if the repair is not right, we make it right - in writing, no arguing. Our technicians are background-checked and uniformed, and they carry professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. No builder-grade substitutes. A square deal: no surprises on the bill. We’ll be there when we say.
FAQs
No - servicing your unit with an independent provider does not automatically void the warranty, provided the work is performed to manufacturer specifications and documented. As an independent Olympia Chimney service provider, we use OEM or equivalent parts and record serial numbers and test results. Keep your invoice; it is your proof of proper maintenance. Call (856) 543-2929 if you need help interpreting your warranty terms.
Common wear parts - thermopiles, gas valves, refractory panels, auger motors - are on our trucks or in our Cherry Hill warehouse. For discontinued OlyWood or early OlyVent lines, we typically source compatible parts from Famco or Copperfield within two to four business days. We do not let you sit cold waiting on a factory backorder if a quality equivalent exists.
Repair makes sense when the firebox is sound, the flue is structurally intact, and the repair cost is under half the price of a new installed unit. We replace when the steel firebox is warped, the flue liner is damaged beyond relining, or you want a significant efficiency upgrade. Our camera inspection gives you the data to decide - photos you can see, a plain-English verdict. Call (856) 543-2929 for a free estimate.
Annually, before the heating season. Even gas units accumulate dust on the burner, develop pilot assembly corrosion, and lose draft efficiency. In Cherry Hill, where many OlyVent Pro units sit unused from April to October, spiders nest in the vent termination and moisture condenses in the firebox. A seasonal tune-up catches this before you smell gas or the unit fails to light on the first cold night.
Skipped maintenance leads to three problems: creosote buildup in wood units creates chimney fire risk; gas units can develop combustion issues that produce carbon monoxide; and minor wear becomes major damage. A cracked refractory panel that costs $340 to replace today can become a $2,800 firebox rebuild if heat reaches the steel wrapper. We tell you honestly when work can wait and when it cannot. Call (856) 543-2929 - estimates are free.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Cherry Hill and nearby areas.





Before
After
Before
After
Before
After